FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 8N, 9N, 2N Tractor Drive Train

[ Return ]

Click here to see parts by model

Axle - Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. (Item #: 109587, Ref. 8N4235C) $157.00

Hub - Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Item #: 109586, Ref. 8N1171) $80.00

Transmission Rebuild Kit - For tractor models 9N, 2N and 8N with 3 and 4 speed transmissions (1939-1952). Will also work for Jubilee except for the transmission to rear end gasket. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. Contains (2) 9N7086, (1) 9N4662, (1) D5NN7223A, (1) 9N7223B, (1) 8N7052A, (1) 15385-TIM, (4) 25877, (4) 25820-TIM. Replaces: 9N7066, 86516471, 9N7086, 9N7086A, 9N7086GV, 9N7120, 9N7120GV, 81804773, 8N7052A, 8N7052A2, C0NN7052A, 83945495, 9N7067, 9N7067GV, 517512, 241336, 605188, 9605470, 9N4662, 9N4662GV, 9N7223, 9N7223B, 8N7223, D5NN7223A, E6NN7223BA, 83958318, 81817212. (Item #: 183888, Ref. TSBK3952) $189.00

Gear, 2nd Transmission Countershaft - Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-1964), 8N (1948-1952). 17 teeth. (Item #: 112154, Ref. B9NN7114A) $123.38

Gear, Mainshaft 2nd - This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Item #: 108536, Ref. B9NN7A381B) $131.00

Countershaft - Fits 8N. The overall length of this countershaft is 11.887 inches. Replaces 8N7111. (Item #: 108538, Ref. 8N7111) $152.00

Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission - This 2nd mainshaft gear and countersaft are for the the following tractors: 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 Cylinder Engines and 4 Speed Transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Item #: B9NN7A381B-set) $193.00

$photo of This gear shift boot has a bottom hole that is 7\8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277.$
Gear Shift Boot - This gear shift boot has a bottom hole that is 7\8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277. (Item #: 108079, Ref. C5NN7277C) $3.20

$photo of ThisTransmission Gear-Shift Lever Knob has is 3\8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3\8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5\16 UNF thread is needed, order C5NN7213A$
Shift Knob - ThisTransmission Gear-Shift Lever Knob has is 3\8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3\8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5\16 UNF thread is needed, order C5NN7213A (Item #: 110012, Ref. BB7213A) $4.30

Axle Bearing Assembly - For tractor models: 8N, 9N, 2N, NAA, Jubilee. This includes rear axle bearing (2N4221) and cup (9N4222). (Item #: 179813, Ref. S.18516) $48.00

$photo of Oil Seal, outer, rear axle shaft. Inside diameter 2 3\8 inches. For tractors 9N, 2N, (1939-1947). 2.437 inch inside diameter, 3.485 inch outside diameter. For 9N, 2N.$
Rear Axle Outer Seal - Oil Seal, outer, rear axle shaft. Inside diameter 2 3\8 inches. For tractors 9N, 2N, (1939-1947). 2.437 inch inside diameter, 3.485 inch outside diameter. For 9N, 2N. (Item #: 126593, Ref. D6NN4251A) $6.40

$photo of For tractor models 8N to serial number 486753. inside diameter 2 3\4 inch. Rear Axle Oil Seals. Also comes as part of A8NN4248A Assembly.$
Axle Oil Seal-Outer - For tractor models 8N to serial number 486753. inside diameter 2 3\4 inch. Rear Axle Oil Seals. Also comes as part of A8NN4248A Assembly. (Item #: 153582, Ref. A8NN4251A) $14.60

$photo of For tractor models 8N serial number 486753 and up, NAA, Jubilee. 3-3\4 inch outside diameter, 2-7\8 inch inside diameter.$
Axle Seal, Outer - For tractor models 8N serial number 486753 and up, NAA, Jubilee. 3-3\4 inch outside diameter, 2-7\8 inch inside diameter. (Item #: 111316, Ref. D5NN4115A) $11.10

Axle Outer Retainer - For model 8N to serial number 486753. Rear Axle Outer Retainer. This retainers come with seal and gasket. One used per axle. (Item #: 109581, Ref. A8NN4248A) $15.30

Countershaft - For 9N, 2N, both with 3 speed transmission. Countershaft. (0621R) (Item #: 126177, Ref. 9N7111) $185.00

No
Picture
Gear Assembly - Gear-shaft assy. For 8N. (Item #: 172808, Ref. 8N6608A) $39.30

Differential Pinion Bearing Cone - For tractor models 2000 1965>, 2N 1939-1952, 3000 1965>, 4110 1965>, 600 with 4 speed transmission serial number <54165 - 1958, 5 speed transmission serial number <196155 - 1959, 601 with 4 speed transmission serial number 54166> -1958-1962, 5 speed transmission serial number 106116> - 1960-1964, 8N 1939-1952, 9N 1939-1952, Dexta 1957-1964, NAA 1953-1954. Replaces BB4221B, 510884. (Item #: 109606, Ref. BB4221B) $34.60

$photo of For tractor models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4\1962, NAA, Jubilee 1953-1954.$
Differential Pinion Bearing Cup, Front - For tractor models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4\1962, NAA, Jubilee 1953-1954. (Item #: 172732, Ref. BB4616B) $59.14

$photo of Bearing, Tapered Cone. For tractor models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4\1962, NAA, Jubilee 1953-1954.$
Differential Pinion Cone, Front - Bearing, Tapered Cone. For tractor models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4\1962, NAA, Jubilee 1953-1954. (Item #: 172497, Ref. BB4621B) $77.00

$photo of Clamp Lock Nut, rear axle, 1-1\4 inch. For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187.$
Axle Nut, Clamp Lock Type - Clamp Lock Nut, rear axle, 1-1\4 inch. For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Item #: 179811, Ref. LN10-21) $29.90

Rear Axle Sure-Seals - Fits 9N, 2N. 1 pair. No need to split collar and replace old outer axle seal. Sure-Seal fits over top of sweat collar. (Item #: 111256, Ref. SS92) $18.80

$photo of This axle collar measures 2 3\4 inches outside diameter, 2 inches inside diameter and 11\16 inches thick. For tractor models 9N, 2N.$
Axle Collar - This axle collar measures 2 3\4 inches outside diameter, 2 inches inside diameter and 11\16 inches thick. For tractor models 9N, 2N. (Item #: 112070, Ref. 9N4132) $11.70

Differential Pinion Bearing Cup - Bearing Cup, Differential Bearing. For 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA Replaces BB4222, BB4222B, 510892. (Item #: 116984, Ref. BB4222) $18.30

Differential Gasket Kit, 6 Pieces - Fits 8N, 9N, 2N. 6 Piece Set. Includes: (1) 9N502, (1) 9N611, (2) 2N4035, (1) C5NN747A, (1) 9N4662, (1) 181217M3 (Item #: 178111, Ref. DGK928) $16.60

Oil Seal, Main Drive Gear - This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Item #: 109957, Ref. 8N7052A) $8.80

Axle Rear Bearing Race - This Tapered Bearing Cup is for models 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Item #: 109579, Ref. 9N4222) $11.20

Axle Seal, Inner Seal - This seal measures 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Item #: 106611, Ref. 8N4233A) $6.10

$photo of Transmission Gear Shift Lever Boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1\2 inches in diameter.$
Gear Shift Boot - Transmission Gear Shift Lever Boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1\2 inches in diameter. (Item #: 184029, Ref. 8N7277) $6.00

Transmission Drain Plug - Has 2.3 inch outside diameter. For tractors: 8N, 9N, 2N, NAA, {1939-1954}. Also filler plug for tractor: NAA {1953-1954}. Gasket available, order part number 8N7011. Replace 9N7010, 8N7010. For a magnetic version of this plug, order 8N7010 (Item #: 115163, Ref. 9N7010) $7.50

$photo of Kit, Nut and Snap Ring. For tractor models 8N, NAA. 1-1\4 inch - 18 Threads per inch.$
Axle Nut and Snap Ring - Kit, Nut and Snap Ring. For tractor models 8N, NAA. 1-1\4 inch - 18 Threads per inch. (Item #: 109585, Ref. CBPN4179A) $9.60

Gear Shift Pin - This gear shift pin fits tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (>1965 ) with 3 and 4 speed transmission). (Item #: 169927, Ref. 9N7221B) $5.70

$photo of For tractor models 8N, NAA, Jubilee all 1948-1954. Inside diameter 1 15\16 inches, outside diameter 2 3\16 inch. These were originally made of cork and all replacements are made from rubber. These must be replaced when the axle seals are replaced.$
Axle Shaft Gasket - For tractor models 8N, NAA, Jubilee all 1948-1954. Inside diameter 1 15\16 inches, outside diameter 2 3\16 inch. These were originally made of cork and all replacements are made from rubber. These must be replaced when the axle seals are replaced. (Item #: 109583, Ref. 8N4284) $3.60

$photo of This transmission gear is the 1st gear, in the 4 speed transmission. It is 60\28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee.$
Gear, 1st, 4 Speed Transmission - This transmission gear is the 1st gear, in the 4 speed transmission. It is 60\28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Item #: 165266, Ref. 8N7100) $289.00

$photo of Axle washer is for model 8N. 1 1\4 inch Id X 2 3\8 inch Od X .20 Thick.$
Axle Washer - Axle washer is for model 8N. 1 1\4 inch Id X 2 3\8 inch Od X .20 Thick. (Item #: 109584, Ref. 8N4293) $5.20

Main Shaft Connecting Coupling - For tractor models 2000, 3000, 8N, NAA, Jubilee and others all with 4 speed transmission. Main shaft connecting coupling has 21 teeth, 16 spline. Replaces 83959995, 957E7106 (Item #: 172715, Ref. E6NN7106AA) $73.00

Gear, 3rd, 4 Speed Transmission - This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Item #: 172982, Ref. 8N7102) $251.00

Transmission Bearing - Main Pilot Shaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 1801, 1821, 1841, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 600, 601, 620, 621, 630, 631, 640, 641, 700, 701, 740, 741, 800, 801, 840, 841, 8N, 9N, NAA, Jubilee, NAB. (Item #: 118284, Ref. 9N7120) $96.00

Differential Pinion Pilot Bearing - This differential pinion pilot bearing is for tractor models 2N (1939 to 1952), 4120 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 800 with 4 speed transmission serial number <54166 - 1958, 5 speed transmission serial number <106115 - 1960, 801 with 4 speed transmission serial number 54166> - 1959>, 5 speed transmission serial number 106115> - 1959>, 8N (1939 to 1952), 9N (1939 to 1952). (Item #: 172931, Ref. BB4625B) $97.00

Axle Nut Lock Ring - For 8N 1948-1953, Jubilee and NAA. Snap Ring. Priced each. (Item #: 112050, Ref. 8N4187) $2.50

Side Cover Gasket - This Side Cover Gasket fits the following tractor models as a side cover gasket and a PTO shift cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee and NAA. Replaces part number 9N4131. (Item #: 112236, Ref. 9N4131) $1.00

Axle Nut - 1.25 inch, 18 hex. For tractor models (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Item #: 178038, Ref. 8N4179) $11.70

Axle Outer Retainer Gasket - Requires 2. For tractor models 8N 1948-1950. (Item #: 109580, Ref. 8N4225) $2.80

Axle Oil Seal Gasket, Inner - For 8N 1948-1950. Used between A8NN4251A Seal and Retainer in Oil seal assembly. Price is for each. (Item #: 182469, Ref. 8N4290) $1.30

Gasket, Main Drive Gear Bearing Retainer - For tractor models 8N, 9N, 2N, NAA, Jubilee, NAB. (Item #: 172746, Ref. 9N7086) $1.00

Transmission Bearing Cone - Main Drive Shaft and Countershaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Item #: 110536, Ref. 9N7066) $11.90

Transmission Bearing Cup - Main Drive Shaft and Countershaft Bearing Cup for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Item #: 121348, Ref. 9N7067) $27.50

Transmission Case to Center Housing Gasket - For tractor models 9N, 8N, 2N. (Item #: 112152, Ref. 9N4662) $2.20

Rear Axle Housing Gasket, Outer - Fits Ford 8N, 9N, 2N, NAA and Jubilee. Replaces 9N4130, 8N4229E and 8N4229. Used for seal between bearing retainer and axle housing or backing plate. More than one may be required when used as 8N4229 shim. Thickness 0.016 inches. (Item #: 153608, Ref. 9N4130) $1.00

Shift Cover Plate Gasket - For 4-SPEED transmissions. For tractor models 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Replaces: 8N7223, D5NN7223A, 81817212, 83906320, 83958318, C7NN7223B, E6NN7223BA (Item #: 109958, Ref. 8N7223) $3.60

Rear axle housing gasket - This Trumpet Gasket is the center housing to rear axle housing. Tractors: 8N, 9N, 2N. (Item #: 109576, Ref. 2N4035) $1.40

Gear Shift Lever Spring - This gear shift lever spring fits tractors with a 3 or 4 speed transmission, or 4 speed Torque Converter Transmission, It is 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wide diameter. It is for tractor models 8N, 9N, 2N. (Item #: 155070, Ref. 9N7227B) $11.50

Differential Bearing and Cup - This Differential Bearing and Cup is used on Ford 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA and other. Replaces original part numbers B4222, BB4222, BB4221B, 510884, 510892, 81709463, 83402421. (Item #: 179801, Ref. 195159M1) $29.60

Transmission Filler Cap Gasket - This Transmission Filler Cap Gasket is used with 8N7485 Transmission Filler Cap. Replaces original part number 8N7037A (Item #: 183007, Ref. 8N7037A) $1.30

Transmission Filler Cap - This Transmission Filler Cap is used on Ford 8N Tractors. It includes a gasket. Replaces 8N7485 (Item #: 178178, Ref. 8N7485) $18.50

$photo of This is a Sherman Transmission Shift Cable with Knob. It is 3\8 inches, 24 NF inner ends and 1\2 inch, 20 NF outer end thread. 31-1\2 inches overall length. It is used on 9N, 2N and 8N tractors with Sherman high\low transmissions.$
Shifter Cable - This is a Sherman Transmission Shift Cable with Knob. It is 3\8 inches, 24 NF inner ends and 1\2 inch, 20 NF outer end thread. 31-1\2 inches overall length. It is used on 9N, 2N and 8N tractors with Sherman high\low transmissions. (Item #: 184666, Ref. SHERMAN-1) $92.00

Input Drive Shaft - This Input Drive Shaft has 10 Splines, 20 Helical Teeth. It is used on 3 and 4 speed transmissions on Ford: 8N, 9N, 2N, NAA, 500, 600, 700, 800, 900. It replaces original part number 2N7017A. (Item #: 179301, Ref. 2N7017A) $261.37

Shim for Bearing Retainer - This is a Steel Shim, .020 thick. It has 12 holes. Will work in 6 hole applications. Fits Ford 8N, 9N, 2N, NAA and Jubilee, 8N4229F and 8N4229. More than one may be required when used as 8N4229F shim. Thickness 0.020 inches. Price is for each. (Item #: 178176, Ref. 183261M1) $3.80

Transmission Drain Plug, Magnetic - Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Item #: 184037, Ref. 8N7010) $18.30

Gasket, Drain Plug - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Item #: 112227, Ref. 8N7011) $1.70

Search Parts for:

Category:

In:

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy